 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Briggs and stratton 300 148cc pulley start problems
On my three year old mower I have a pull cord to start. This is traditional of a push mower. When I pull the rope the engine locks and the rope will not move. I took the top housing off and the rope cylinder moves fine. The rotary assembly that starts the engine moves freely. When they are together they do not work. Can anyone help?
|
||||
Check out some similar questions!
Just bought a new lawnmower, and it starts fine, but it sounds as if its at an idol speed. It didn't come with a idol adjustment cable, so I'm just wondering if it's the way its supposed to be? It sounds like it's barely running, and it only cuts grass at a very slow walk. Any help would be...
I have been having problems with my briggs and stratton 12.5hp motor! The carburator keeps getting too much gas into the float reservoir and gas comes out. I recently purchused a brand new carb and installed it but still seam to get too much gas to the carburator when I go to start it. Could it be...
I have a B&S 16.5 that will only run at Idle and at Full Choke-I removed the carb and checked and cleaned the jets. When advanced above idle it backfires out the exhaust. And then shuts down. It will restart but only in idle or full choke. Any Ideas?
I bought an '85 Murray Mower and it needs a new stacked pulley, part number 90329z. They are discontinued and I need one. Any idea for sources? Thanks Steve
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
