Ask Experts Questions for FREE Help !
Ask
    bex3bad's Avatar
    bex3bad Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 24, 2011, 08:39 AM
    How to start a cmfg 80 oil heater?
    We ran out of kerosene. We had the heater installed about a month ago. My fiancé put kero in the tank but we can't get it started. Help!!

Check out some similar questions!

I have a delonghi oil heater that seems to be leaking oil ~ is that normal? [ 1 Answers ]

I have a delonghi oil heater that seems to be leaking oil ~ is that normal? And is there somewhere to refill it?

Bryant heater/air conditioner combo, heater does not start [ 1 Answers ]

I have a Bryant heater/air conditioner combo that the heater has stopped working. Here is what happens when I turn it on manually- Smaller fan kicks on I can hear the gas come on for a few short seconds I can hear the igniter trying to ignite It seems like it is not igniting and after a...

Oil Heater not Starting [ 2 Answers ]

Yes! It's August in North Carolina however I don't want to wait until winter to start worrying about this. What procedures do you go through if the pilot lite goes out? Could it be as simple as that?:

Oil Heater Won't start [ 2 Answers ]

Yes this job was done by a local professional company.They first got the furnace working however the tank was underground and possible filled with water.So in turn we put a tank above ground and ran a line straight to the furnace, after the unit stopped working the second time we added the filter...

Oil Heater Doesn't start w/no fail light. [ 1 Answers ]

Oil heater not starting two weeks ago. Replaced R8184G because it was receiving 115VAC but not starting. I could push relay to make position and heater would cycle but not run again. No error light again. Worked for a week and a half after replacing and now does the same thing? In the...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.