Ask Experts Questions for FREE Help !
Ask
    cardincal's Avatar
    cardincal Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 10, 2009, 11:47 AM
    Bryant heater/air conditioner combo, heater does not start
    I have a Bryant heater/air conditioner combo that the heater has stopped working. Here is what happens when I turn it on manually-

    Smaller fan kicks on

    I can hear the gas come on for a few short seconds

    I can hear the igniter trying to ignite

    It seems like it is not igniting and after a few cycles of this, I just shut it off. It has ignited a few times in between but it is not consistent.

    Any idea on what it could be?
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Feb 11, 2009, 04:49 AM
    Inducer runs, and you hear gas delivery. Spark ignition, I assume? Check the electrode gap, spark lead, and ground integrity of the burner assembly and ignition module. Weak or inconsistent spark is likely the culprit.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a bathroom light/fan/heater combo [ 2 Answers ]

I am upgrading my fan/light combo to a light/fan/heater combo in our bathroom. I have installed the unit in the ceiling and am preparing to wire it in. I would like to use a combination 3 switch allowing for the different components to be controlled separately. This, I hope will also allow me to...

373LAV/376CAV Bryant Air Conditioner/Downward Heater [ 1 Answers ]

My water pan got too full (I believe) and tripped the switch on me. Someone told me before where and how to reset this thing but I can't find the information. Can anyone tell me again how to reset my air conditioner after the full pan switch shuts 'er down? Thanks!:rolleyes:

Heater or Air Conditioner does not turn on [ 2 Answers ]

Hi I have a central air and heater unit and when I turn it on for heat or air at the thermostat nothing happens. Can you help me?

Bryant unit heater [ 4 Answers ]

30 year old Bryant unit heater was working yesterday not today. I have 120 volts to the control box, the 732 pilot is still lit. so I bench tested when cold there is no continuity, after heating I have continuity. I do not know what to check next I do not have a wiring schematic. Any sdvise would...

View more questions Search