Ask Experts Questions for FREE Help !
Ask
    JohnKell's Avatar
    JohnKell Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 9, 2011, 12:27 PM
    Wiring from meter box to main lug
    I have Cutler-Hammer 200 Amp. Meter box with additional spaces in the bottom portion and I want to run 100 Amp. Service to a building. I am looking for how-to tips and diagrams to accomplish this.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Mar 10, 2011, 07:22 AM
    There are many How To books avalaible showing illustrations, descriptions, of the various techniques and materials available, here is one:

    Black & Decker The Complete Guide to ... - Google Books

    Do some homework and get back with any specific questions you may have.

    Also, contact your local building or code enforcement office for their requirements.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring diagram for 60 amp main lug [ 1 Answers ]

I need to know how to install a 60 amps outdoor main lug

Wiring a combination meter and main disconnect. [ 1 Answers ]

I bought a Square D CQRA200 Meter/main disconnect combination and I expected to see the neutral isolated from the ground. Does the neutral and ground start from the same block?

Load Center Main Lug or Main Breaker for the Attic [ 5 Answers ]

I have a large attic (on 3rd floor), 38'x28', which is unfinished space. The 2nd floor central air-condition is located there and used to be fed by a 60 feet of 12/3 cable (I changed the cable to 10/3 to reduce the chance of voltage drop) and it's fed by a dual 15A breaker (240v breaker) in the...

Outdoor electrical circuit 400' from main meter box [ 3 Answers ]

I want to add two circiuts to a junction box , apx 400' from a pass through electrical box on my property, I had put in underground 1 1/4 cunduit with a pull box every 100 feet when the house was built. What size cable should be used for this, it will need to handle 2- 20 amp circuits

Can I convert a main breaker Cutler Hammer loadcenter to main lug? [ 1 Answers ]

I was wondering if Cutler Hammer made a part to convert a main breaker load center (CH) style, to a main lug panel. If so, does anyone know the part number or can you refer me to a location where I could find it? Cutler Hammer's website is not too user friendly. Thanks

View more questions Search