Ask Experts Questions for FREE Help !
Ask
    coyote556's Avatar
    coyote556 Posts: 13, Reputation: 1
    New Member
    		  
    #1

    Aug 1, 2007, 10:41 PM
    Can I convert a main breaker Cutler Hammer loadcenter to main lug?
    I was wondering if Cutler Hammer made a part to convert a main breaker load center (CH) style, to a main lug panel. If so, does anyone know the part number or can you refer me to a location where I could find it? Cutler Hammer's website is not too user friendly. Thanks
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Aug 3, 2007, 01:41 PM
    It will be easier to leave the main breaker, so you have wire lugs to connect to. If the main breaker connect tos lugs on the load side, then just remove the breaker.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Difference between Main Lug and Main Breaker Panel [ 8 Answers ]

What is the difference between a Main Breaker Panel and a Main Lug Panel and can either be used in new residential construction.

Convert Main Panel to Subpanel? [ 3 Answers ]

After rough-wiring my old house to a new 200 amp Main Panel (wired-in but not yet connected to the service line and still using the original 100 amp fuse-type panel) I've decided to build a major addition that makes the originally planned service entrance a poor location. Question: Can I...

New 15A breaker trips main 100A breaker [ 6 Answers ]

Hi, I've been finishing my basement and I added a few 15A breakers One room has 8 outlets in series with the first starting about 6 feet from the main panel. There is currently no load on this outlets. When installing the drywall I accidentally shorted the outlet closest to the panel. It...

Main breaker and main disconnect [ 2 Answers ]

What I have is a home built in 1960 moved in 2 years it had a meter hanging from the rear of house with no main, 240v 50amp circuit to stove, 240 30amp to dryer, 5 breakers for the rest of house 1 20amp and 4 15amp. What my plan is to replace the meter housing and put a g.e. 200amp Disconnect on...

Garage main lug only height [ 1 Answers ]

Hi, just wondering if there is a minimum or maximum height for the main lug only box when surface mounted on a wall in a detached garage? I am running 40amps, 240V service underground to the garage. THanks in advance. Regards, Steve

View more questions Search