 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Well stops working, but will start again after shutting the breaker off for 10 minute
The last couple nights when I have gotten up in the morning I have no water pressure. I go check the pressure tank and it is empty. I check the breaker and it is not tripped, so I cycle it and I can hear the relays in the pump control box switch, but still no water. I thought maybe it was froze up, but I leave the breaker off for about 5 - 10 minutes, flip it back on and it works fine. This has only happened the last couple nights when it has gotten down to 0-10 degF. The pressure tank, pressure switch and control box are all located in my basement and the pump is a submersible located about 70 ft underground. The bladder, pressure switch and control box are all fairly new, within in a couple months.
|
||||
Check out some similar questions!
We flipped a couple of circuit breakers to do some electrical work in the room, and when we turned the breakers back on, our Harbor Breeze ceiling fan and light will not work. It is a remote controlled unit and the remote is getting power. It does have pull chains, but I do not see a way to...
We have a Carrier "1 for all programmable or non-programmable digital thermostat". When we turn off the ac, (not to heat setting, but just "off"), I see the green indicator light go out immediately, but the air still blows for up a minute longer. Sometimes it shuts off immediately, but often it...
The hot water in the house for a minute and then stops.I have a mixer tap which I take the top off and blow back the hot water for a minute.The hot water runs again for a minute then stops.There is no banging in the pipes or any noise ,and the hot water system is full
My heat is shutting off after 1 minute. It is then making a clicking noise.How can I fix this? I'm in Texas but it is cold weather --BURRR! :(
I have a 220 outlet three feet from a 110 outlet. When I am using a clothes washer on the 110, it goes dead after a while (10-30 minutes). No breaker is tripped. When I turn on the 220 clothes dryer, the 110 washer restarts from where it left off.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
