Ask Experts Questions for FREE Help !
Ask
    outlawgarage's Avatar
    outlawgarage Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Feb 1, 2011, 07:39 PM
    Armstrong outside heater lights, burns a few seconds and shuts off
    Quit this afternoon after everything was closed. Burner will light and burn, when the pilot quits the burner quits.
    Armstrong outside unit model PGE10A42D100-1PA

Check out some similar questions!

Maytag Gas dryer lights burns for a few seconds then cliks and the flame shuts off? [ 0 Answers ]

I have a Payne 394GAW that starts and burns for 3 seconds, shuts down and recycles. [ 0 Answers ]

I have a Payne 394GAW (about 1987, no standing flame,electric ignition). Starts fine and burns 3 to 4 secs and recycles. Classic dirty flame sensor problem. I cannot find a flame sensor to clean. I have removed burners and looked throughout. Is it in the ignition assembly? Is there some other flame...

I cleaned the ignitor and the first burner lights, for a few seconds then shuts off [ 0 Answers ]

The fan is running, I changed the position of the ignitor and got the flame to stay lit and the furnace is running; but it will run until therm temp setting is met then will turn off like normal. But when it fires up again, the flame will not stay lit. I cleaned the ignitor and temporarily removed...

The flame on the water heater only burns for a few seconds and then shuts down. [ 0 Answers ]

I am not currently getting any hot water out of my water heater. The flame comes on and burns for a few seconds and then shuts off. This same patterns then continues to repeat.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.