 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Aire-Flo gas furnace periodically shuts down.
I have an Aire-Flo gas furnace - model no. AF80MPA075B3A I rent - however I believe it was installed around 2003. For the last month - the furnace will start, the gas tries to ignite but after 2 seconds it will shut off. It tries to ignit 3 times - then if unseccessful the furnace shuts off. It periodically goes through this process and sometimes does come on for a period before shutting down again. Filter is new. We have been through the process of disconecting power and re-setting the furnace - which sometimes works... but is a pain to continuously do. There is a green light that blinks once - pauses then blink 6 times consecutively, however I can't find a "guide" anywhere on the furnace to tell me what this means. The landlady has yet to fix the problem. My question is - what does the blinking light combination mean and is there anything I can do to fix this on my own?
|
||||
|
||||
|
Also - I've dusted the furnace area where the main parts are as I was told that sometimes the igniter switch can get "obstructed". I don't know if this is true or not... but it's another piece of info to add to above. Also - there are no issues with the thermostat - it works fine. Thanks in advance for your help/advice!
|
||||
|
||||
|
I have an Aire-Flo gas furnace - model no. AF80MPA075B3A I rent - however I believe it was installed around 2003. For the last month - the furnace will start, the gas tries to ignite but after 2 seconds it will shut off. It tries to ignit 3 times - then if unseccessful the furnace shuts off. It periodically goes through this process and sometimes does come on for a period before shutting down again. Filter is new. We have been through the process of disconecting power and re-setting the furnace - which sometimes works... but is a pain to continuously do. There is a green light that blinks once - pauses then blink 6 times consecutively, however I can't find a "guide" anywhere on the furnace to tell me what this means. The landlady has yet to fix the problem. My question is - what does the blinking light combination mean and is there anything I can do to fix this on my own?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have an Aire-Flo Furnace ( Model AF90MPE075U3). Last winter it began malfunctioning. The local repair man said the inducer fan was bad and replaced it. It worked for a while and began acting up again. He then decided the intake air line was to small and not sloped properly. I added a second line...
My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it's just the burners that turns off after a few seconds. If I try turning the furnace on and off a few times it sometimes fires up and stays on. I have tried...
My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it just the burners that turns off. If I try turning the furnace on and off a few times it sometimes fires up and stays on.
I have an Aire-flo AF92--. I have power to the board both high and low voltage, and have fan, but no led lights and the AC or furnace won't come on. Is the board bad?
I have an Aire-flo model AF80 forced air furnace that is not putting out any heat. The blower is working fine. I have tried the circuit breaker and replacing the thermostat but neither seems to work. Anyone have any suggestions?
View more questions Search
|
