I have an Aire-Flo af92--. I have poweer to the control board and the fan runs, but

mitchell1972 Posts: 1, Reputation: 1

New Member

May 23, 2010, 04:53 PM

I have an Aire-Flo af92--. I have poweer to the control board and the fan runs, but

I have an Aire-flo AF92--. I have power to the board both high and low voltage, and have fan, but no led lights and the AC or furnace won't come on. Is the board bad?

Check out some similar questions!

Gas furnace not blowing hot air but blower is working fine. I have an Aire-flo AF80 [ 1 Answers ]

I have an Aire-flo model AF80 forced air furnace that is not putting out any heat. The blower is working fine. I have tried the circuit breaker and replacing the thermostat but neither seems to work. Anyone have any suggestions?

My Lux aire control board fuse blows. [ 1 Answers ]

I have a heat pump systems a LuxAire made by York it is ony 4 year old the model number is: F2FP048H06G I have isolate all t/stat wire in and tested for possible grownding with negative result. I did rung the A/H fan on on and works find but when I set the unit for cooling or heating it blows...

Humming from Fan Timer Control Module board? [ 6 Answers ]

I have A 6 year old Heil furnace model NTC6150kj, and a couple of weeks ago I noticed my Aprilaire humidifier was running even when the furnace shut off. The humidifier will not cycle on and off as it is supposed to. During investigation, I heard a fairly loud humming noise coming from somewhere...

Can I install a fan control board? [ 3 Answers ]

I am a broke, but resourceful guy who got a quote from an HVAC company to install a new fan control board in my Ducan furance for $420. He wrote to part numbers on the estimate. Ducane part 20430801 (Ducane) & ST9160B1076 (Honeywell). He told me it would take him 1-1.5 hrs to install. To make...

Wiring fan from thermostat to control board? [ 10 Answers ]

Hi all. I just installed a new thermostat thinking this would solve my problem of not being able to engage the fan using the old thermostat (using "on" or "auto".) I was wrong. I'm getting the same behavior with the new thermo. According to another HVAC forum, it turns out the reason I...

View more questions Search

Check out some similar questions!

Add your answer here.