 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman furnace gsk90703bx
92% Furnace is shutting down after reaching desire temp, to restart I must remove hose from pressure switch and pinch and squeeze the end of it, then put back onto the pressure switch, furnace would run for awhile, then go out again.
|
||||
Check out some similar questions!
I have a goodman gmp 100 4 It doesn't matter if I have the ac or furnace on it comes on goes off even when I total disconnect the thermostat I had the wires sticking from the wall the unit still came on if I place the unit on the off it still comes on but ont the furnace blower I was told that I...
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
Have a Goodman Furnace that continues to fail to start up. After some diagnosis on my part I find the incoming vent PVC pipe is clogged with frost. I believe the incoming air is drawing in moisture from the hot air exiting the furnace and then building up frost just inside the pipe opening. I...
Good man furn blinks 6 times No power at therm Blower runs
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
