Ask Experts Questions for FREE Help !
Ask
    dghurd's Avatar
    dghurd Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 12, 2011, 05:54 AM
    Payne furnace LED code 12
    I have a payne furnace downflow model number PG8DAA when it is turned on the blower runs for a minute or so then nothing happens. I held in the door cut off switch and turned to inducer wheel by hand; the furnace tried to start then. The glow plug came on and ignited the flame but it shut down right away. The inducer wheel seemed to get stuck or have a hard time spinning (plus made a rubbing or grinding noise). The wheel spins freely when the furnace is off with no rubbing noise at all. (as soon as the inducer wheel started to spin by itself I did not turn it by hand anymore)
    angeladk's Avatar
    angeladk Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 20, 2011, 04:38 PM
    The windings in the inducer motor are going bad and needs replaced
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Payne furnace trouble code led continuously blinking [ 0 Answers ]

Started to cool off and finally had to turn on the heat. Our Payne system is only blowing out cold air. The trouble code LED is blinking continuously. The label on the side of the unit says that continuous blinking means "Line voltage polarity reversed". I haven't touched anything since the last...

My carrier furnace LED light is flashing a code. How do I tell what code it is? [ 1 Answers ]

The error code is flashing and I know certain lengths, long and short indicate a code but how do I tell which one it is?

I have a Bryant/Payne Model 376CAV Upflow LED code 33 issue [ 1 Answers ]

This furnace is about 14 yrs old I think and does not have an air conditioning unit; only heat. Started having issues with furnace not working some months ago. Has let us trip it on all this time by pushing all the reset buttons inside. Which reset button that makes it come back on has not had...

Carrier furnace led code 33 does not change to 13 like everybody else [ 1 Answers ]

Have a carrier furnace and blower is staying on and led code 33 shows up, replaced filter and still same issue? Any help

Red Led Light constantly flashing on my 3Ton Payne Gas Furnace [ 0 Answers ]

Have a 3ton Payne Gas frunace... the Ignitor glows and the Gas Valve opens,the burners turn on,but after about a minute,the flame goes out and the Induced Draft motor shuts off.Only the blower stays running... the red led light keeps flashing... what is wrong? I replaced the ignitor,but the problem...

View more questions Search