Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Payne furnace LED code 12 (https://www.askmehelpdesk.com/showthread.php?t=543217)

  • Jan 12, 2011, 05:54 AM
    dghurd
    Payne furnace LED code 12
    I have a payne furnace downflow model number PG8DAA when it is turned on the blower runs for a minute or so then nothing happens. I held in the door cut off switch and turned to inducer wheel by hand; the furnace tried to start then. The glow plug came on and ignited the flame but it shut down right away. The inducer wheel seemed to get stuck or have a hard time spinning (plus made a rubbing or grinding noise). The wheel spins freely when the furnace is off with no rubbing noise at all. (as soon as the inducer wheel started to spin by itself I did not turn it by hand anymore)
  • Jan 20, 2011, 04:38 PM
    angeladk
    The windings in the inducer motor are going bad and needs replaced

  • All times are GMT -7. The time now is 07:54 AM.