Ask Experts Questions for FREE Help !
Ask
    santacruzali's Avatar
    santacruzali Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 14, 2010, 09:41 AM
    I have a Bryant/Payne Model 376CAV Upflow LED code 33 issue
    This furnace is about 14 yrs old I think and does not have an air conditioning unit; only heat. Started having issues with furnace not working some months ago. Has let us trip it on all this time by pushing all the reset buttons inside. Which reset button that makes it come back on has not had any consistent pattern. It will come back on but only will work for a few cycles of coming on and it repeats not working. The furnace starts the process and coil never fires nor flames appear inside. Replaced the sensor coil wire already and control panel is brand new. Neither stopped the issue. Now out of the blue the LED code 33 is coming on Control panel and none of the manuals explain these codes. What does that code indicate? Also where can I find the LED code list to keep with the manuals for the future?
    santacruzali's Avatar
    santacruzali Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jul 14, 2010, 09:55 AM

    Thought I best add that the LED code is now flashing 31. Also there is no list for the code explanation inside the furnace . Thanks everyone!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace model 376cav, error code 24. [ 7 Answers ]

I am getting error code 24 on my bryant furnace. Could someone please help me by letting me know what the code is, and how to fix it? I was trying to install a new thermostat and might have got wires crossed. Thanks

Bryant model#310AAV042090ACJA Gas furnace LED light off [ 5 Answers ]

Hi, I have a Bryant model#310AAV042090ACJA Gas furnace. The system just won't turn on. I checked and the LED light is completely off. Turned power off to system, gas off, waited couple minutes, turned back on; nothing - won't turn back on. Strange thing is that at night it did not work, then in...

What are Bryant 80 Plus Heater LED Status Code [ 3 Answers ]

What are the status codes that flash on the LED on a system that will not turn on.

Bryant Plus 80 / Model 330AAV Upflow Code 14 problem [ 3 Answers ]

Getting a code 14. 1st the system comes on. I hear the blower going for about 90 seconds. 2nd the blower wheel spins and eventually I start to smell gas. The unit clicks 3 times but the ignitor never comes on. That's when I get a code 14.

Bryant Model 330AAV code 43 [ 1 Answers ]

I have a Bryant Model 330AAV Upflow- the flashing indicator lights say it could be a Pressure switch, Draft safeguard switch stuck, or low heat pressure. How do I determine what the problem is?

View more questions Search