 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lennox combustion air inducer noise issue
Have a Lennox gas #G40UH48C11005 furnace from 12/2003 that is making a "bearing" type noise at start up, as the ignition starts the noise quiets. Am I looking at replacing the entire inducer and if so can a part #/cost be made available online?
|
||||
Check out some similar questions!
My furnace's draft motor never stops even after one full heating cycle, which it's supposed to stop! This causes the pressure switch to stay closed even after the thermostat calls for heat the second time (after the initial heat cycle). When I stop and start the main switch in my basement,...
My draft inducer fan is running for about 3 minutes before the furnace ignites. Once it ignites,the furnace is operating correctly. This seems to be longer than normal. Any ideas on what's wrong, or what I need to check/test? Thanks!
It's Saturday night, no luck with finding a service repair guy. It looks like our Carrier White Rodger 36E furnace air inducer rotation is not spinning when we attempt to turn on the heater. The rotation wheel makes a loud grinding sound, we try to help it spin, it goes a little, but then stops. ...
I have a Lennox whisperheat furnace with electronic ignition.It clicks and lights the pilot for about a second (with a pretty blue flame)then it clicks and the pilot goes out.I know the clicking is a gas valve working,but other than that I don't know.Why won't it stay lit and ignite?Your help would...
Hi all, I have a 4 and 1/2 year old ComfortMaker furnace. The combustion air blower started making a rumbling noise while starting and stopping and continues to vibrate while running. I had a heating & cooling service look at it. $65 just to show up. Without taking anything apart he said...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
