 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Forced hot air issue (Draft inducer fan)
My draft inducer fan is running for about 3 minutes before the furnace ignites. Once it ignites,the furnace is operating correctly.
This seems to be longer than normal. Any ideas on what's wrong, or what I need to check/test? Thanks! |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My furnace's draft motor never stops even after one full heating cycle, which it's supposed to stop! This causes the pressure switch to stay closed even after the thermostat calls for heat the second time (after the initial heat cycle). When I stop and start the main switch in my basement,...
My HVAC contractor identified that the draft inducer motor had seized on my Goodman furnace (this after he just replaced the blower motor this past April). I researched the replacement part after he gave me a quote and I would like to avoid his supplier's markup on the replacement motor, and...
I am afraid of a gas furnace, for fear of an explosion. I have had this fear since I was a little boy. Hence, I simply must have an electric heating system. However, the area in the MidWest where I have been considering has almost no electric homes, mostly because of the high electric rates...
I have a Janitrol Furnace that will not start up. I pulled of the tube from the draft inducer to the pressure switch. I sucked on the tube and the furnace fired up. So I checked the voltage going to the draft inducer, it read only 6v ac. Where do I go from here?
What is the replacement inducer for a horizontal Carrier 349MAV036075 furnace? Currently, the inducer blower is a Fasco 7162-3136. The Fasco website suggests the A142 but with the inducer mounted blower upward on the furnace the condensation drain nipple on the inducer is at the 9 o'clock...
View more questions Search
|
