 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My Carrier GB3AAV furnace is pushing heat through both zones...
Downstairs thermostat is kicking the heater on but there is heat coming out of the upstairs zone. I flipped the thermostats, no change. I checked the controller and no errors. I'm a lay person, but due to a tight budget I need to try and resolve this myself. Thoughts?
|
||||
Check out some similar questions!
The furnace is about 5-6 years old, and advertised as "ultra-efficient". Gas furnace is inside, Carrier Tech 2000SS A/C is outside. Heat won't come on, despite my reset efforts: -turn thermostat to lowest setting -turn off all electrical power to furnace -remove access panel from furnace...
I have a Bryant plus 90 furnace, circa 1988, which has given us superb service and seems to be good for the long haul. I have a friend who just switched out his Carrier Puron, 2 ton, 13 SEER, Air source heat pump Model# 38YXA024301 with a ground source heat pump. Could they be married? Or would...
58PAV - I just changed the ancient Honeywell mercury thermostat with a 5-2 progammable, the same one I put in my office. Now the da*n thing won't fire. The Statue Led is ON constantly, indicating a loss of 24V somewhere. I'm sure it is a fuse, but the only one I found is a 3A automotive type. ...
I have a Carrier gas furnace weather maker, model 9200. When I turn the thermostat to heat, the induce drap blower is not coming on, but instead the ac and the main blower is on. When I check the power that is coming out of the PC board for the induce drap blower, I get 2 Volt.
I have just replaced my thermostat and now furnace blows cool air (fan on constantly), even with thermostat control in off setting. Followed all install directions w/ new thermostat To the letter. Is this a limit switch malfunction or what?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
