 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carrier furnace 58pav no heat
58PAV - I just changed the ancient Honeywell mercury thermostat with a 5-2 progammable, the same one I put in my office. Now the da*n thing won't fire. The Statue Led is ON constantly, indicating a loss of 24V somewhere. I'm sure it is a fuse, but the only one I found is a 3A automotive type. Any idea where the 24V fuse is?
Freezing in Indiana. |
||||
Check out some similar questions!
Hello all, I purchased a home a few months ago with a Carrier 58PAV unit. The AC worked fine but I'm having a problem with the heating, it would not come on so I changed out the thermostat but quickly realized that was not the problem. If I turn on the thermostat and turn off the main switch on the...
I want to kown where I can purchase the blower of carrier 58pav
Hello if someone can help me it would be great Ihave searched and found so many different reasons but I would like the best help I can get. It's a carrier 58pav my parents installed in Feb 1999. After the gas turns off, the blower runs for a few minutes, pulling cold air from outside. I...
I have a Carrier gas furnace weather maker, model 9200. When I turn the thermostat to heat, the induce drap blower is not coming on, but instead the ac and the main blower is on. When I check the power that is coming out of the PC board for the induce drap blower, I get 2 Volt.
I have just replaced my thermostat and now furnace blows cool air (fan on constantly), even with thermostat control in off setting. Followed all install directions w/ new thermostat To the letter. Is this a limit switch malfunction or what?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
