 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Blower/Fan motor will not start on it's own Lennox G8
My Lennox G8 blower/fan motor sometimes fails to start. When it does this it makes a humming noise. If I bump it or help it by turning the pulley it will start. I was thinking the start capacitor? Am I close maybe? It's a newer motor. Any ideas? Thanks!
|
||||
Check out some similar questions!
I have a airtemp probably 70's model we had to replace the blower motor about two years ago. Now when the fan is supposed to start it either won't start or is very slow to start. When this happens you can manually move the squirrel cage and it runs great through the complete cycle. We just replaced...
How to check freon & how to fill on Lennox A/C condenser compressor.
The gas furnace: Lennox G24M 3/4-100A-7 SN:6398B17474 In T-start, If heat and cool off, fan in on position, furnace indoor blower will run; Also try heat with fan on, blower also run; however switch T-start to cool, regardless fan in on or auto, when outside condenser is started, the furnace...
Hi - I'm in a new home and turned on the furnace for the first time - a Lennox Pulse 21, fairly new by the looks of it. It was inspected a few weeks ago by the home inspector and passed, but I didn't notice anything at that time. When the unit starts up, and begins blowing heat, there is a...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
