Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring Ceiling Fan with no white wire in ceiling
[ 2 Answers ]
Hello all, I'm trying to install a ceiling fan in an old house (about 60+ years). I have a new ceiling fan with 4 wires, black, blue, white, and green. On the ceiling, there are only three wires, 2 copper wires (unfortunately no colors, just a dark covering over both), and a green wire, which has...
Ceiling wiring
[ 2 Answers ]
I removed a ceiling fan and light kit and replaced it with a ceiling fan and light kit with a remot. The light kit can be controlled by 3 switches(=4 way) and fan by 1 switch. The ceiling has black, white, red and copper wire, the old ceiling fan had same wiring, however, the new fan light kit...
Ceiling Fan Wiring
[ 17 Answers ]
Hi- I replaced an old ceiling fan and light kit with a new one. Standard wires from the ceiling, black, white, green for fan and red, gray for lighting. The fan had black, white, green for fan, and blue for the light kit. Here's what I did: Black - Black (Standard hot) White - White and gray...
Ceiling fan wiring
[ 2 Answers ]
I recently installed a ceiling fan with 3 way speed and light combination according to the supplier instructions. This model comes standard with a remote control and receiver. When I tried it out, it acted quite strange. 1) The speeds are in reverse order 2) At any speed, when the light is...
Ceiling fan wiring, 2 blk, 2 what, 1 red, 1 grn from ceiling
[ 3 Answers ]
I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top... View more questions Search
|