Ask Experts Questions for FREE Help !
Ask
    GregnTn's Avatar
    GregnTn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 2, 2010, 11:01 AM
    Suggestions for a 'curved' transition strip from carpet to tile (on concrete)?
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Dec 2, 2010, 03:20 PM

    What kind of tile? If ceramic tile, u can tuck carpet between tile and tackless. Use carpet staple gun for added strength.

    If vinyl tile u can use a free form tape down metal.This is available at good carpet store. Usually up to 12 foot lengths.

    Chuck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carpet to Tile transition [ 10 Answers ]

I have the tile intalled and will be installing the carpet up to it. The border will be 11 feet long and runs across part of my basement from wall to wall. I would like to just butt the carpet up to the tile and tuck it in without using threshold which would visually separate the two areas. My...

Carpet to tile transition [ 3 Answers ]

I may have missed up already. I installed tile before the carpet in room. I have put tile in the walkways of entrance in main door but door is halfway between room. Is there anyway I can put carpet to it without putting a top strip on the carpet.

Transition Strip from Carpet to Tile [ 1 Answers ]

We have laid ceramic floor tiles next to carpet but the tiles are about 10mm higher and we would like to put a transition strip between them... does anyone know if it is possible to get these?

Tile to carpet transition - concrete floor. [ 3 Answers ]

I will be tiling in my basement, on a concrete floor. Would it be better to install backerboard under the tile to bring it up 1/4" or 1/2" to make the carpet/tile transition easier? Or should I lay tile on concrete floor and then transition it from that height? Any suggestions would be helpful. ...

Transition between tile & carpet [ 5 Answers ]

I'm laying tile in my bathroom where there used to be linoleum. The floor butts to carpeting and I've been told I should use a metal strip between the two surfaces. I bought the strip and have cut it to fit but my question is how do I adhere it down? It looks like I could screw it down or...

View more questions Search