Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Joining Corner Bead on Soffits
[ 6 Answers ]
My basement project required creating several soffits to enclose existing ventilation ducts. One of these runs a considerable distance (30 + feet) across one wall. On the front edge of this I assumed that I would install traditional corner bead, but that would require "joining" in at least one...
Installing corner bead
[ 3 Answers ]
Hello. What's the best way to install corner beads for drywall jobs? I'm seeing more people prefer nails. If I am going to use nails, which type should I get and what length? I installed half inch drywall. Thanks.
Corner Bead
[ 4 Answers ]
What type of corner bead would you recommend and why(metal, plastic, glue type)? Thanks, Gregg
Tiling corner bead
[ 2 Answers ]
I have green board on the bathroom walls, and durarock on the floor and the entire shower. This is a new bathroom I am building. My question was should I put the paper corner bead on the corners which have durarock. These corners are the sides of my shower where my doors are going. If I use corner...
Tiling corner bead
[ 2 Answers ]
I have new durarock and green board on my walls and floor on the outside corners should I put corner bead and mud before tiling or should I use thinset View more questions Search
|