Ask Experts Questions for FREE Help !
Ask
    txlorolr's Avatar
    txlorolr Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 22, 2010, 05:31 AM
    Rough dollar figure to repaint int trim in oil
    In tx what is a rough dollar figure or the going rate to repaint doors ,jambs casings and base trim in the interior of a home
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Nov 22, 2010, 03:11 PM

    Hi TX...

    Sorry, but as a general rule around here we don't estimate prices for people... just doesn't make sense!

    I could tell you one thing and then I promise you someone else would pop in and give you something totally different.

    Your best bet will be to call in 3 professionals and get free estimates on the work you need done.

    Choose the company you feel most comfortable with and be sure to check all references!

    Finally, do not make a final payment on the job until everything is finished and cleaned properly.

    Mark
    pattyg2's Avatar
    pattyg2 Posts: 480, Reputation: 27
    Full Member
    		  
    #3

    Nov 23, 2010, 05:36 PM
    I agree with massplumber. It all depends on how much trim and how many doors and what condition they are in right now. If they are stained they will need to be primed before painting. If repainting I would go with an enamel paint for durability and if covering a dark color primer would be needed. Get estimates and don't pay everything until complete and you are satisfied.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Repaint aluminum deck fenscing [ 8 Answers ]

I have extensive aluminum deck fencing around my decks and stairways. A few days ago I had them cleaned by power washing and a lot of the paint was washed off. What kind of paint should I use to repaint the aluminum? Thank you.

Need to repaint Fender Squire jagmaster [ 3 Answers ]

Hi, My son has an electrict guitar that he wants to refinish/repaint and I was wondering if anyone has done this before and could point us in the right direction. Is it too difficult for just anyone to do? Thanks :)

Gas or Gas & Oil for Homelite Trim N' Edge [ 3 Answers ]

Gas or Gas & Oil for Homelite Trim N' Edge Number UT20022A Doe it only take Gas or does it take Gas & Oil for Homelite Trim N' Edge? Grandfather gave it to my son without the manual. Thanks

1994 Astro Van idles rough and low oil pressure [ 1 Answers ]

I got a 94 Astro Van that seems to run fine when you are driving ,but when you stop at lights or stop signs she will shake pretty badly and the oil pressure will drop all the way down with the gauge bouncing up and down. When I hit the gas again the oil pressure jumps back up to about the midway...

How to clean old paint and repaint shower walls and floor [ 1 Answers ]

How do I clean old paint that is peeling off the walls and floor of painted cement block shower? What products should be used to repaint?

View more questions Search