[cookinco]

We used to have carpet in the basement and we replaced it with wood-look vinyl. The green tile look vinyl was damaged somewhat when the carpet to tile transition was removed. The two vinyl types are pretty flush and the area needs a pretty wide transition I'd say. I'd rather not fasten anything down into the concrete since it is so difficult to change and easy to damage. Any ideas?

[ma0641]

HD and Lowe's and others have a varietry of transition strips you can glue down. Make sure the vinyl tiles come as close to each other before putting down any transition. You can also cut a tile into say 2" strips and glue that down over the joint. When finished, use clear caulk to seal the edge from breaking off.

[creahands]

There is no way to install a transition strip without attaching to floor.

If area to cover is more then 1 1/2'', recommend a wood saddle. U may have to cut door to install wood saddle.

Chuck