Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
All concrete floor transition strips
[ 6 Answers ]
I need to find vinyl transition strips for my finished basement, which consists of four slabs of concrete. The joints are a little rough, with the maximum gap being 1" and the floor levels vary from 1/8" to 3/8". Does anyone have any suggestions?
Laminate flooring transition to raised vinyl flooring
[ 4 Answers ]
Installer put new 1/4' subfloor in bathroom last year when installing new Tarkett (vinyl) flooring, with a metal strip transition to existing hall carpet. Now we are installing 12mm laminate in hall, which with underlay, is approximately the same height. However, when the metal strip was removed,...
Where should I transition the flooring between two rooms?
[ 3 Answers ]
This is sort of hard to describe but I sure could use everyone's help so I will try to do the best I can. I am also going to attach a jpg of the area of the home so you can see what I am talking about. We are remodeling our house and I am working on flooring in my reading room. There is an...
Transition from travertine tile to stained concrete flooring
[ 2 Answers ]
I just recently removed carpeting and padding from my main living area (gotta love having 3 dogs and a long haired cat!! ) and had stained concrete floors made, finished with a thick coat of epoxy (again, love those dogs). While I'm using quarter round trim to finish along the baseboards, I'm...
Vinyl flooring
[ 2 Answers ]
Is it OK to install vinyl flooring directly on top of a cement slab. View more questions Search
|