| 
 
 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Lakewood 3 speed reversible window fan hv18wr wiring diagram
 [ 8 Answers ]
 Need wiring diagram Switch was removed and fell apart not sure where wires went. 8 wires coming from motor 
Wiring diagram for reversible motor needed
 [ 5 Answers ]
 I'm trying to wire the below motor to a double pole/double throw toggle switch. The toggle switch has 6 terminals. There are 5 colored wires coming out of the motor - black, white, green, orange and red. The motor has a starter capacitor, is reversible and I'm using it with 115v. Can anyone... 
Wiring Ceiling Fan with no white wire in ceiling
 [ 2 Answers ]
 Hello all, I'm trying to install a ceiling fan in an old house (about 60+ years). I have a new ceiling fan with 4 wires, black, blue, white, and green. On the ceiling, there are only three wires, 2 copper wires (unfortunately no colors, just a dark covering over both), and a green wire, which has... 
3 speed reversible window fan wiring
 [ 5 Answers ]
 Hello - I took apart my old Westinghouse window fan to paint it and had to disconnect the capacitor, which was mounted to the frame. I could've sworn the capacitor leads were connected to (1) a green wire coming from the fan motor and (2) a terminal labeled S2 on the control switch. However, when... 
Ceiling fan wiring, 2 blk, 2 what, 1 red, 1 grn from ceiling
 [ 3 Answers ]
 I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top... View more questions Search 
 |