Ask Experts Questions for FREE Help !
Ask
    andremack's Avatar
    andremack Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 1, 2010, 12:55 PM
    Gas valves
    Ignitor is glowing red and gas is not igniting... blower is running and furnace is clean the service indicator light is a solid red light no blinking what could be my problem
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Nov 1, 2010, 04:54 PM

    Gas solenoid valve not opening. Use a tester to see if power is sent to the valve when there is a call for heat.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is it common that gas valves can be faulty or does something on the boiler blowing it [ 1 Answers ]

Is common for gas valves to be faulty or can something on the boiler blow the valve I have just replacedone on a ideal boiler after the previous one failed after 5 days this new valve also failed is this just bad luck or something serious leading to the valve to fail

White rodgers gas valves [ 1 Answers ]

I have a WR gas valve model 36C68 type 209. Gas is continuously provide to the pilot, even when the pilot is disconnected electronically, and or, when the entire furnace system is unplugged. I have removed and inspected the pilot control value mounted on top of the gas value body. The small...

Luxaire furnace gas valves [ 0 Answers ]

Hi Guys, I have an older Luxair furnace that has a sticky gas valve or something. The pilot works fine but the tubes won't ignite. I gently bang on the valve with a hammer and the furnace takes off and runs fine for a couple days. Is there any way that I can maintenance the gas valve to extend its...

Cross Reference Honeywell Gas Boiler Valves [ 1 Answers ]

IS Honeywell Gas Valve # VR8300C4506 the correct replacement for Burnham Hydronics # VR8200C3005 on my Burnham Gas Boiler # P-205-W, s/n 17 115020? Please advise ASAP. Thanks.

Is there a lubrication for furnace gas valves [ 1 Answers ]

Hi, I have a Natural Gas furnace that I have had converted to Propane for use in my shop. I use it only occasionally and it works well but the valve passes. Once the pilot is lit everything works well except that while in idle the gas valve passes to allow a small amount of Propane gas to...

View more questions Search