Ask Experts Questions for FREE Help !
Ask
    mac4177's Avatar
    mac4177 Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 6, 2010, 07:54 AM
    Luxaire furnace troubleshooting
    Luxaire propane furnace.. 4yrs old.
    Following a power outage... the furnace pre blower comes on fan comes on but no heat. Furnace is flashing 3 flashes . Filter is clean and blower motor seems to work on fan.
    Any thoughts.. Thanks Greg
    danaa's Avatar
    danaa Posts: 1, Reputation: 1
    New Member
     
    #2

    Oct 23, 2010, 12:29 PM
    Our furnace is giving codes, for the 5 then a 3. Whar do the codes stand for

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Luxaire furnace troubleshooting [ 0 Answers ]

As far as I can tell I have an ignitor problem. Works intermittantly. Filter is clean, pre-blower activates appropriately and IF ingnitor comes on, then the gas ignites and all is well. Thoughts?

Luxaire furnace troubleshooting [ 1 Answers ]

I have a 2334 sg. Foot log home it has 2 3.50 ton units 1 of the units runs twice as much as the other.these are brand new units been in house less than year.Had the heat and air company back out to my house 4 times can't really tell me why they have closed down some vents at units didn't really...

Luxaire troubleshooting [ 1 Answers ]

My outside furnace will come on but no heat its like a valve is stuck. If I give the flow valve a slight tap on the bottom the furnace will light up, but when the thermostat reaches temp and turns off the start up has to be repeate. Sometimes it does fine , but rite now it won't even try to run...

Luxaire troubleshooting [ 0 Answers ]

Our luxaire is a high efficiency model and frequently will shot off before the requested temperature is reached. We just had the "Initiator Motor" (power vent motor) replaced because it seized up. I thought the issue was related but it is not. The problem happens several times/day. If I shut...

Luxaire troubleshooting [ 6 Answers ]

I am in the third heating season with my Luxaire system. One of my units stopped blowing air and if I swith it to manual, it still does not initiate the blower. The burners fire up and burn for about a minute but the blower does not start and the burners shut off. What controls the blower...


View more questions Search