 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace burners won't switch on
I have a Johnson Corp Air Ease furnace with a standing burner. I recently replaced the thermostat with a nicer one. At first, the furnace would run, but never turn off. Now the burners won't kick on at all. I've already narrowed the issue down a bit in jumping the white and red terminals. No luck. The thermostat does allow me to kick the furnace fan into "on" mode without issue. I've checked the voltage coming off the transformer and the gas valve does get ~50volts. I'm stumped - seems like if the issue were the gas valve, the pilot also would not work. What makes the burner kick on?
|
||||
Check out some similar questions!
Red light on the computer board stays on steady
How do I ignite the burners on a goodman furnace?
My furnace is having some trouble. The pilot is on but the burners won't light. I was wondering if there is a simple solution to this problem. I'm trying to avoid expensive fixes if at all possible. Any help is greatly appreciated. Thanks.
17 year old gas furnace... burners won't ignite. What are the logical troubleshooting steps to solve this problem?
I have an old Airtemp furnace that has a problem. When I turned it on the first time this season the burners would not light. The pilot light ignites and then I hear a click (assume gas valve should open) to supply gas to burners but no joy.:confused: The pilot then goes out for a couple of...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
