Ask Experts Questions for FREE Help !
Ask
    muneca1979's Avatar
    muneca1979 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 29, 2009, 08:33 PM
    Goodman furnace burners
    How do I ignite the burners on a goodman furnace?
    MarkwithaK's Avatar
    MarkwithaK Posts: 955, Reputation: 107
    Senior Member
     
    #2

    Jan 29, 2009, 08:34 PM

    You don't. The ignition device does but seeing as how you failed to provide any real info that is all I can offer you.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace HSI does not glow, burners never light [ 3 Answers ]

I have a Goodman gas-forced air furnace, about 10 years old. I have power to the main control panel (part# 18099-13) and gas is "on". In the furnace sequence posted by sticky, I am having problems at the step where the hot surface ignitor "glows" to light the burners. All other steps, such as the...

Goodman pilot light on but furnace burners will not come on? [ 4 Answers ]

We have a Goodman furance that will not produce heat. The pilot light is on, the gas is released, but the burners will not kick in. Do you have any idea what is causing this problem.:confused: Scott's Chicago

Pilot on furnace on but burners won't come on [ 2 Answers ]

My furnace is having some trouble. The pilot is on but the burners won't light. I was wondering if there is a simple solution to this problem. I'm trying to avoid expensive fixes if at all possible. Any help is greatly appreciated. Thanks.

Gas burners on furnace do not ignite [ 3 Answers ]

The gas burners on my furnace do not ignite. When I turn on the heat at the thermostat and set the temperature to a setting higher than the room temperature I can hear a faint click within a couple of seconds. Within a few more seconds the blower comes on, but the burners never fire up. There is a...

Airtemp furnace burners do not come on [ 4 Answers ]

I have an old Airtemp furnace that has a problem. When I turned it on the first time this season the burners would not light. The pilot light ignites and then I hear a click (assume gas valve should open) to supply gas to burners but no joy.:confused: The pilot then goes out for a couple of...


View more questions Search