Ask Experts Questions for FREE Help !
Ask
    jasmarie1's Avatar
    jasmarie1 Posts: 57, Reputation: 0
    Junior Member
    		  
    #1

    Oct 15, 2010, 04:59 AM
    My heat pump has a drier installed from the factory do I need to add another drier
    My heat pump has a drier installed from the factory do I need to add another drier to the liquid line
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Oct 15, 2010, 05:46 AM

    Has the system been opened up to the atmosphere?
    jasmarie1's Avatar
    jasmarie1 Posts: 57, Reputation: 0
    Junior Member
    		  
    #3

    Oct 15, 2010, 10:12 AM
    No
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #4

    Oct 15, 2010, 10:36 AM

    THen you shouldn't have to replace it... or use a second one. THere are there to absorb any minute amount of moisture that remains after installation that is not removed in the system vacuuming process prior to charging the system. They are a one shot deal... and need replaced every time the system is opened ot the atmosphere.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ac drier [ 1 Answers ]

How do I no when my drier is bad

Gas Drier runs OK but no heat [ 1 Answers ]

Kenmore Elite Gas Drier runs OK but no heat

Drier will not start [ 4 Answers ]

Kenmore 110.96583220 Sudden death, apparent broken belt, belt replaced, power at wall receptacle, at both sides of blower-mounted fuse and thermostat, door switch OK, pulley motor switch reset properly. No juice at the motor? (It's not easy to get to to make measurements with all parts...

New matag drier won't heat [ 1 Answers ]

OK it works in the store lol. My 4 prong connecter is hot on both red and black my grounds are grounded and I replaced the 4 prong connecter still no heat it turns good jumped both grounds and still no heatchecked back of drier and black is hot red is hot checks hot on both and I am going crazy...

View more questions Search