Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I replaced pull switch lights with recess but the wall switch won't turn off the light
[ 2 Answers ]
I added lights and outlets to my basement and all of the outlets work fine. Before I started the switch on the wall controlled one light and all of the others had pull strings. I've tried everything but the switch will not turn off the remaining three lights. What did I do wrong... how do I fix it?...
Light Switch Trips Breaker
[ 4 Answers ]
I installed new switch and light, the switch trips the breaker I must have wires wrong , what color goes where, Thanks
Replaced chandelier, light stays on switch does not work
[ 1 Answers ]
I replaced a chandelier. Ceiling box had 3 black wires tied together, 3 white wires tied together, one red wire capped, and two ground copper wires tied together. The new light fixture had one white and one black wire. I connected the four black wires together and capped, the four white wires...
Replaced ceiling fan light switch - problems
[ 1 Answers ]
Hello. I have a ceiling fan with 2 pull chains (fan, light). It also operates via remote control. The wall switch is just on & off. In a perfect world, when it was first installed, the remote would make the lights brighter & dimmer. The remote would also do 4 different fan speeds. At some point,... View more questions Search
|