Ask Experts Questions for FREE Help !
Ask
    lenap's Avatar
    lenap Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 13, 2010, 09:28 AM
    Replaced light now lights in other rooms won't come on
    fatheroftwo's Avatar
    fatheroftwo Posts: 5, Reputation: 1
    New Member
     
    #2

    Oct 13, 2010, 09:32 AM
    Check your gfci outlets to see if any tripped and reset them.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #3

    Oct 13, 2010, 10:05 AM

    Father of two, Why do you assume that the lights are on a GFCI circuit. Lighting does not require GFCI protection.

    Lenap

    When you replaced the <Lights (sorry for the typo)>, what wires did you reconnect to the new receptacle.

    When you open up a receptacle you would find a two wire connection at the end of the circuit.

    If you found a four wire connection, then the receptacle is part of a continuing circuit.

    It is not uncommon for a branch circuit to supply multiple rooms.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #4

    Oct 13, 2010, 10:29 AM

    I'm with Don on this but think he meant to say light fixture not receptacle

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I replaced pull switch lights with recess but the wall switch won't turn off the light [ 2 Answers ]

I added lights and outlets to my basement and all of the outlets work fine. Before I started the switch on the wall controlled one light and all of the others had pull strings. I've tried everything but the switch will not turn off the remaining three lights. What did I do wrong... how do I fix it?...

Took ceiling fan down, replaced with light and the light won't shut off [ 1 Answers ]

We took a ceiling fan (that had a light kit on it) down and replace it with a simple light fixture. The light itself has white and black wires and a ground. We figured that we needed to wire the white to white, ground to ground and black to black with red. The light is on we switch the power...

Replaced a bathroom light/ now it won't turn off [ 4 Answers ]

Just replaced a bathroom light and now it won't turn off. Comeing from the wall were the old light was is 2 white/ 2 black/ and 2 green wires. Can someone please help me figure this very frustating matter.

Replaced light fixtures and installed dimmer, no power to two rooms [ 8 Answers ]

I:confused: installed 5 ceiling fixtures (2bathrooms & 3 bedrooms) and a dimmer switch in one of the bedrooms. Now a bedroom and bathroom have no power. The bedroom with the dimmer switch works and I have pulled all the lights apart in search of any faulty connections. I have also rewired the...

My furnace won't light and the lights on my control module won't come on [ 2 Answers ]

Ok a couple of question if you can help I have a comfortmaker furnace I believe 1999 it came on a couple of times after I bought a new transformer, board, capacitator, and ignition control module now it won't come back on What to Do! Also I wanted to know if you can tell me the difference between...


View more questions Search