Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I replaced pull switch lights with recess but the wall switch won't turn off the light
[ 2 Answers ]
I added lights and outlets to my basement and all of the outlets work fine. Before I started the switch on the wall controlled one light and all of the others had pull strings. I've tried everything but the switch will not turn off the remaining three lights. What did I do wrong... how do I fix it?...
Took ceiling fan down, replaced with light and the light won't shut off
[ 1 Answers ]
We took a ceiling fan (that had a light kit on it) down and replace it with a simple light fixture. The light itself has white and black wires and a ground. We figured that we needed to wire the white to white, ground to ground and black to black with red. The light is on we switch the power...
Replaced a bathroom light/ now it won't turn off
[ 4 Answers ]
Just replaced a bathroom light and now it won't turn off. Comeing from the wall were the old light was is 2 white/ 2 black/ and 2 green wires. Can someone please help me figure this very frustating matter.
Replaced light fixtures and installed dimmer, no power to two rooms
[ 8 Answers ]
I:confused: installed 5 ceiling fixtures (2bathrooms & 3 bedrooms) and a dimmer switch in one of the bedrooms. Now a bedroom and bathroom have no power. The bedroom with the dimmer switch works and I have pulled all the lights apart in search of any faulty connections. I have also rewired the...
My furnace won't light and the lights on my control module won't come on
[ 2 Answers ]
Ok a couple of question if you can help I have a comfortmaker furnace I believe 1999 it came on a couple of times after I bought a new transformer, board, capacitator, and ignition control module now it won't come back on What to Do! Also I wanted to know if you can tell me the difference between... View more questions Search
|