Ask Experts Questions for FREE Help !
Ask
    WILDTHANG1963's Avatar
    WILDTHANG1963 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 12, 2010, 11:28 AM
    Replace Washing Machine Shutoff Valves
    We just recently replaced the cut off valves to the washer. But since we did this we have no hot water coming in and the cold won't shut off when washer is full. Please help
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Sep 12, 2010, 12:24 PM

    Hi Wildthang,
    You piggybacked on a year old thread so I gave you your own.
    FIRST OFF LOSE THE CAPS!! We don't yell at each other on The Plumbing Page.
    In replacing your faucets you've disturbed minerals built up on the pipe walls and they are now clogging your valves.
    Shut the water off to the hot valve and remove the faucet. Now hold a large pan over the open pipe and turn the water back on for a minute to flush out the supply. Now check the seat on the faucet to be sure that it's clear and clean out any trash if it isn't.
    Reassemble and test. Better flow form the hot side? Tell me if it isn't.
    Now do the same thing with the cold side. Good luck, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need to replace belt on washing machine. What to do? [ 2 Answers ]

I have an Amana top loading washing machine that has a broken belt. Took off front panel. What has to be taken loose to get the belt around the pulley at the bottom of the motor? Tub springs, pump housing? Should I turn machine on it's back for access to screws at bottom of pump? How do I...

Replace Washing Machine Shutoff Valve [ 11 Answers ]

One of my washing machine shutoff valves is leaking. I would normally fix or repair this myself, but the valves are "encased" in a washing machine hookup box and I don't know how to replace the valve with the box in place and I don't see any way to remove the box. There is no copper pipe above...

Fixing leaking washing machine water valves [ 2 Answers ]

I am installing a new washing machine and the valve is leaking from the base - not from where the hoses attach and not from the handles you turn the water on and off with. Please help!

How to replace plastic coupling kenmore 80 washing machine [ 4 Answers ]

How to replace plastic coupling from transmission to motor on Kenmore 80 series direct drive washing machine. I' ve located the problem, just don't know how to remove old part.

Washing machine shutoff valve [ 3 Answers ]

How do itake the valve apart to replace o-rings that leak? I have a 2-m2 washing machine shutoff valve.


View more questions Search