Ask Experts Questions for FREE Help !
Ask
    Woodard's Avatar
    Woodard Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 10, 2010, 01:34 PM
    Do I need a neutral to feed meter base 480 volts?
    Need to know if a neutral is needed to feed a meter base?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Sep 10, 2010, 02:03 PM
    What is with the rash of 480v commercial/industrial questions lately ?

    IMO if you have ask something like this you should not be doing the job.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #3

    Sep 11, 2010, 11:53 AM

    Who is doing the installation, you or the power company?

    Have you checked with the power company to see what they require?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #4

    Sep 12, 2010, 05:04 AM
    If the 480 volt system has a neutral, such as for a 277/480 volt 3 phase 4 wire system, then the neutral must be installed to the meter, and any panel in the system.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is equipment cheaper to run on 480 VOLTS OR 220 VOLTS 3 phase [ 1 Answers ]

I have 2 refrigeration compressors. One 5 h.p. 480 volts, 3 phase @ 4.5 amps. One 5 h.p. 230 volts 3 phase @ 20 amps. Which one will cost less to run assuming electric costs are same?

Dayton 1RKU2 Heater is 480 volts can I change that to 220volts? [ 6 Answers ]

I have a Dayton 1RKU2 Heater that I resently purshased for a fair amount. But then when I got home I noticed it was 480 volts. I would like to know if there is a way that I could change the voltage to 220 volts, or if they make a conversion kit for this.

Dayton 1RKU2 Heater is 480 volts can I change that to 220volts? [ 1 Answers ]

I have a Dayton 1RKU2 Heater I bought it for a reasonable amount but then I went to hook up the electrical and noticed it is 480volts 3 phase. I was trying to find out if there is a way to change that to 220volt. If they make a conversion kit for this model or what would I need to do to change it?

How do 480 volts work for heat pump? [ 1 Answers ]

:) Thanks

480 volts in home [ 2 Answers ]

I was wondering if it is legal to have 480 volts and 480 volt devices or equipment that runs on 480 volts in my home. Thank you timbeemoe

View more questions Search