Ask Experts Questions for FREE Help !
Ask
    skins4ever's Avatar
    skins4ever Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 21, 2010, 08:52 PM
    Coleman Evcon Furnace
    I live in a Mobile Home as another question stated. I also have an Coleman Evcon Furnace with NO visible Model number and I'm looking to replace my filter. The old owner Cut to fit the their filter which doesn't fit that well! My measurements where odd compaired to other filters Ive had B4; they were 17 1/2 H x 19 1/4 W x 1 D. Now I don't want to have to get "Custom" Filters, I would think Coleman would have an OEM filter for them, However, I can't find one for the life of me! Any suggestions I REALLY need NEW ones these are disgusting, I'm living in Triple digit heat and my house isn't cooling! :( Please Help. Lisa
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Aug 21, 2010, 09:40 PM

    I`ve dealed with very few coleman furnaces but found the homeowners had bought to filters of whatever the size that was needed to cover the area where 1 bigger filter should go
    example 2 10x9`s fitted end to end
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman evcon furnace [ 4 Answers ]

Furnace will won't heat. Model #BGMO7516B Serial # 980905038. Red light blinks once. Will ignite but won't kick in to heat.

Coleman evcon furnace [ 5 Answers ]

My home has coleman evcon furnace 12 years old.I can set the thermostat at 74 degrees and the furnace will start with a 30second purge then the ignitor will warm up and glow red then the main burner lights.then the burner stays lit and the blower runs for a couple minutes. Then the thermostat calls...

Coleman evcon furnace [ 1 Answers ]

I have a Coleman Evcon heating and air conditioning unit, model # DGAT070BDD, year 1996, in my double-wide trailer home. It is making an odd beeping noise, something like an alarm. I can't seem to find a manual to help me diagnose the problem. Any thoughts to help me?

Coleman Evcon Furnace [ 1 Answers ]

We have a Coleman Evcon DLAS075BDD furnace which keeps displaying error codes: 1-Ignition Failure and 4-Limit cycling. We have replaced the circuit board. Inspected the ignitor and the flame sensor and both appear good. Also have taken the exhaust vent/hood off and vaccuumed out any rust to...

Coleman evcon furnace [ 1 Answers ]

I have a coleman evcon direct vent forced air furnace, the air is blowing cool air, everythinig else is working it's firing ,the fan is working

View more questions Search