 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Replace the main relay. If the problem persists, replace the Ignition Control Module (ICM): https://www.askmehelpdesk.com/cars-t...tml#post265896 |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My car started right up this morning, then died within two seconds. When I hit the key again, It did not sound like it was turning over right. My first thought was the timing belt, but I have pulled the valve cover off, and both the cam and the pistons seem to be moving like they should. It's an...
No start symptoms: 1. Car turns over and runs for about a second, then dies after that initial "vroooom". 2. Occasionally, it will start and run for a day or two without problems. 3. This morning it cut out will doing 55 on a highway. I drifted to the shoulder, down shifted to 4th to "jump"...
I have an 89 Honda civic that will not start... Main relay is clicking like is should but I pulled it out and it smells burnt... If I leave it for a few hours it will start... and as long as I let it run it starts running. But if I shut it down it will not start again. Hopefully tomorrow I can get...
I am having problems with my 1989 Honda Civic. The engine was rebuilt about 4 months ago and has run fine. On occasion (about once per month) after driving the car and then shutting it off, it won't restart. It seems to be an issue with no spark as it turns over fine, but doesn't even attempt to...
Read your FAQ and am at a dead end. It had been not starting on moist days due to bad distributor gasket and/or old rotor. The other day at a gas station it would not start (very cold day). It turns over but does not start 1. Replaced the Distributor Cap and Rotor - still did not start,...
View more questions Search
|
