 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool senseon gas dryer no power up
Whirlpool senseon gas dryer was not heating up I unplugged it and plugged it back in there was a popping sound now it does not power on at all. My circuit breaker did not blow. Are there fuses inside the unit I can replace? And why didn't the unit heat up an guesses? The vent is not clogged. Thanks
|
||||
Check out some similar questions!
I have a Whirlpool Senseon Gold Gas Dryer Model# GG9868JQO. The unit heats up,blows hot air through the vent,but the drum refuses to spin. Any ideas.?
I still have not fixed my Whirlpool senseon dryer. I cannot seem to find the problem. The keypad will not light up at all or respond to any action. I took the cover off and I cannot seem to get the 5vdc needed from he electronic board to the keypad. I replaced the electronic assembly (twice) with...
How do you get the access panel off the bottom of the dryer? It says spring clips, but I can't figure out how to release them or how hard to pull. AND, where are the thermistors located? There is a small door on the back panel that comes off, but it doesn't seem to lead to them. I am afraid to...
Purshased a home with a Whirlpool Senseon dryer model # GGW9868KQ1. I have a problem every time we put in a load, we select the settings and press start. Dryer starts, but after a minute the machine stops and displays E1 on timer. We restart and does it again, we have to constantly keep drysitting...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
