Ask Experts Questions for FREE Help !
Ask
    dixiekrkt's Avatar
    dixiekrkt Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 8, 2010, 06:37 AM
    Kenmore dryer won't heat model 110.67432600
    Kenomore dryer runs but no heat and doesn't shut off at end of heating cycle model no.
    110.67432600
    stuartn's Avatar
    stuartn Posts: 85, Reputation: 2
    Junior Member
    		  
    #2

    Aug 8, 2010, 06:56 AM

    Does the timer turn off on a time cycle? If it does then it is most likley a heating element problem. Unplug the dryer and remove the back panel. On the bottom right side there will be your element. 2 screws a couple of wires and a thermostat. Test with an ohm meter or just look for a broken wire.
    dixiekrkt's Avatar
    dixiekrkt Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Aug 8, 2010, 07:09 AM
    No the timer does not turn off on the time cycle
    stuartn's Avatar
    stuartn Posts: 85, Reputation: 2
    Junior Member
    		  
    #4

    Aug 8, 2010, 08:08 PM

    You have a timer problem if the timer does not turn off on the time cycle. This may or may not cause the heating problem. It still could be the element or thermostats.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dryer model 110.66662501 won't heat [ 1 Answers ]

Dryer runs fine but no heat. Model Number 110.66662501

Kenmore dryer no heat model 110.66712 [ 0 Answers ]

The dryer runs, but does not heat up. It also never shuts off on timed drying. I found what looks like a burned out resistor, a ceramic bar covered in hard plastic, spliced in the orange wire between the timer and the heater, per schematic. The plastic cover is split open and looks melted. Would...

Kenmore Model 110 78942802 gas dryer won't heat [ 0 Answers ]

I've cleaned out the dryer and it runs and turns fine it just won't heat. I'm not sure what to look for or how to fix this problem. Thanks for your help

Kenmore Dryer Model # 110.96591220 Won't Heat [ 5 Answers ]

Dryer won't heat and I have continuity on all the reachable parts. Not getting juice to the coil during operation. I should have 0.00 OHMS for normal operation, tested when cool on all the parts, right? Thanks for your help.:eek:

View more questions Search