Ask Experts Questions for FREE Help !
Ask
    mollyata's Avatar
    mollyata Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 24, 2010, 07:17 AM
    Kenmore dryer model 110.66662501 won't heat
    Dryer runs fine but no heat. Model Number 110.66662501
    secal48's Avatar
    secal48 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jul 13, 2012, 01:47 PM
    Just fixed the same problem. The heating element had burned through and the wire coil was broken. A Sears parts center had the unit in stock for around $65. It took about 1/2 hour to remove the back of the dryer (9 screws) and to pull the old heater coil out (2 more screws). 3 wires to hold the thermostat in place and the dryer now works just fine.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dryer no heat model 110.66712 [ 0 Answers ]

The dryer runs, but does not heat up. It also never shuts off on timed drying. I found what looks like a burned out resistor, a ceramic bar covered in hard plastic, spliced in the orange wire between the timer and the heater, per schematic. The plastic cover is split open and looks melted. Would...

Kenmore Dryer Model # 110.96591220 Won't Heat [ 5 Answers ]

Dryer won't heat and I have continuity on all the reachable parts. Not getting juice to the coil during operation. I should have 0.00 OHMS for normal operation, tested when cool on all the parts, right? Thanks for your help.:eek:

Kenmore Elite Dryer Model 110.74972301 no heat [ 1 Answers ]

I have a dryer that runs but has no heat. The ignitor do not spark the gas to get the heat on. The model is 110.74972301. I had this on an older model and found a fuse on the back of the dryer that was an overload fuse. Replaced it and it worked. I can not find that on this dryer. Can you...

View more questions Search