Ask Experts Questions for FREE Help !
Ask
    91honda's Avatar
    91honda Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Mar 14, 2010, 04:33 PM
    1993 d15b7 distributor work a 1991 honda civic d16a6
    Will a 1993 d15b7 distributor work on a 1991 honda civic d16a6 and how do u wire it up ?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Mar 14, 2010, 04:42 PM

    I don't know for sure, but I doubt it.
    carlf00's Avatar
    carlf00 Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Jul 13, 2010, 06:25 AM
    It may do that's what I'm using on myn, I just snipped the wires and used block connectors, then again I haven't tried running myn yet because it won't start, but I do have spark, so I'm trying to find out what else it could be
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honda civic SOHC Vtec D15b7 [ 7 Answers ]

My car starts very normal when very cold and when the engine is already on tempeature. But between there it starts difficult . You can smell the overloaded gasoline in the car!! I Found 2 errors which are Code 6 and Code 14 ( water temperature sensor and IAC valve ). I've already changed the IAC...

My 1990 Honda Civic Hatch D16a6 died.why? [ 13 Answers ]

I was driving around 90mph and the tack. Just stopped and went down. I tried to rev it up and it started to go up again, but then just dropped. What happened? It gets fuel, spark, charge, it is a fuel injected car. The ecu only has the single flast when it is turned on, but nothing after that....

1991 civic d16a6 idle issues [ 3 Answers ]

I recently put back my civic engine. It had some new internals put in. ever since I put it back the idle doesn't stay level anymore. Symptoms: When I start it up, it idles fine. After I warms up and I press the gas a little to rev it up, it will drop and stall out. If I ease the gas down,...

1991 honda civic. Fan or vent will not work after replacing ignition switch [ 2 Answers ]

I have this 91 honda hatchback. The engine will die as soon as you let go of the key. So I replaced the ignition switch. Now, the car is running but the hot or cool air will not come on. The cooling fan sounds like its louder then before once its on. Everything else seems OK on the inside again....

1991 Honda Replacement Distributor [ 1 Answers ]

I have a 1991 Honda Civic that needs a new distributor. The bearing is bad along with the internal wiring, coil, cap and rotor. It will cost me more to fix than the price of a new one on the internet. Does anyone have any experience with the inexpensive distributors you can buy in the $125 - $150...

View more questions Search