Ask Experts Questions for FREE Help !
Ask
    debsid's Avatar
    debsid Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 2, 2010, 06:33 PM
    Goodman ac model cpke30-18
    Can you tell me the color wiring for my goodman ac model cpke30-18
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Jul 3, 2010, 07:33 AM
    What are you wanting to wire? The entire unit? The fan motor? Contactor? Capitor? Thermostat?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Janitoral model cpke30-1b does not have 24 volt power [ 1 Answers ]

There is no 24 volt power from the compressor back to sequencers. What may cause this?

Goodman air conditioners MODEL CPKE30-18 [ 5 Answers ]

I have a Honeywell RTH3100C thermostat, could you please show me the wiring sequence. Right now I have the white wire on the AUX terminal, the yellow on the Y terminal, green on the G terminal and red on the R terminal. The unit comes on in the AC mold but only produce heat. My my model is the...

Goodman gds80703axbb 07 model.. [ 3 Answers ]

Goodman gds80703axbb 07 model.. goes like this ,I get a call ,unit is downflow in closet and is in lockout. I retry,suspect flame sensor,cleaned it real good, no go.Had a look at the board,burnt spot on it,advised owner maybe he should have an electrician out to find why I have voltage on my...

Goodman cpke30-18 outside unit does not work, hums [ 2 Answers ]

I have a goodman split unit modell number on the outside unit is CPKE30-18. Had this when I moved 5 years ago. Have read most negative reviews on this equipment. The outside unit has stopped working, I do hear an electrical hum at the outside, the fan does not rotate and I have no money to...

Goodman model gmpn080-4 [ 4 Answers ]

Have a goodman model gmpn080-4 I lost blower limit pressure switch previously and seemed to be the same thing, ordered part and still does same thing. Thought it may have had a vacuum leak so I sealed the edges, as long as it is not connected (securely) to the exhaust pipe it runs fine. As soon as...


View more questions Search