Ask Experts Questions for FREE Help !
Ask
    basement hopeful's Avatar
    basement hopeful Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jan 2, 2007, 02:16 PM
    Basement finishing systems
    Does anyone have any experiences or opinions with Owens Corning Basement Finishing Systems? It appears to be a quick alternative to standard studs and drywall, if you don't mind the paneled wall effect. Does anyone have any ideas on costs?
    Total Basement Solutions's Avatar
    Total Basement Solutions Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 12, 2007, 09:38 AM
    Quote Originally Posted by basement hopeful
    Does anyone have any experiences or opinions with Owens Corning Basement Finishing Systems? It appears to be a quick alternative to standard studs and drywall, if you don't mind the paneled wall effect. Does anyone have any ideas on costs?
    I recently got a new position with one of the many Total Basement Solutions Companies as an installer nationwide! The system is MOLD, Fire, FLOOD and stain resistant. The cost is approx. HALF THE PRICE of building a room addition. The basement completion system is aesthetically superior to anything I've personally seen so far. The components to this system are also smaller than most systems making the panel effect less noticeable. But there are so many pros about this system opposed to others you will have to visit the website personally.

    P.s. the website is... totalbasementsolutions.com
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Finishing Basement - 8' or 9' Sheetrock? [ 4 Answers ]

Am taking the plunge and finishing my basement, have just started. You may see me on this board with many questions to come... First is the size of drywall to buy. My ceiling is 9' tall to the joists with at least 1' of this holding pipes, electrical, duct work, etc. Have definitely decided on...

Basement finishing [ 17 Answers ]

I am in the early stages of laying-out my basement plans. There is a rough-in for toilet and shower, but not where I want the bathroom to be. I would like to move the rough-in pipes about 10-12 feet from where they are now for my ideal basement plan. I've done a lot of DIY home pprojects, but...

Basement Finishing [ 1 Answers ]

I'm starting to finish a basement that is 15' high. Where the bathroom is at will only be framed 8' with a sheetrock ceiling and a plywood floor above that for storage. My question is will the walls of this bathroom be considered load bearing? And can I get away with 2x6 joists spaced 16" above?...

Basement finishing continued [ 1 Answers ]

Hi all, thanks skiberger for the advice, I'll try the test spot of plastic. Now for a plumbing question: I have all the rough for the bathroom in but the only drain vented is for the sink. Does that mean the toilet and shower will vent through that on OK or do they need to have a vent as well?

Basement finishing [ 1 Answers ]

Hi all, I'm going to be working on finishing part of my basement to include installing a bathroom. I am wondering since the floor is concrete do I need to install some sort of sub-floor (example: bathroom tile or vinyl-and other room carpet) or will all materials work on the concrete? Thanks for...

View more questions Search