Ask Experts Questions for FREE Help !
Ask
    moore4285's Avatar
    moore4285 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 30, 2010, 01:29 PM
    What size heat pump do I need for a house of 2200 sq ft one fllor
    What size heat pump do I need for a house of 2200 sq ft one floor
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jun 30, 2010, 02:04 PM
    You will have to do or have done for you a Manual J calculation. Usually these are done by the contractors bidding on your job.

    Anything other than a manual J calculation is guess work and in today's HVAC world guess work just causes to many problems.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #3

    Jun 30, 2010, 06:37 PM

    Most likely a 3 1/2 ton, but depends on location and your house.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What size is my heat pump I have a Carrier 38ycc036320 [ 2 Answers ]

Trying to find out the size of my heat pump

How to size for heat pump [ 7 Answers ]

I have 1238 square ft. ranch house and it requires a heat pump system. What size heat pump unit is require heat and cool this house?

About intake size of 3 ton heat pump [ 1 Answers ]

I am in the middle of a remodel and the intake size is 12 x 20 and the house has a 2.5 ton. I am going up to a 3.0, 15 seer unit and one of the bidders tells me the 12 X 20 is fine and the other says it needs to be larger. I do understand that there are lots of calculations to consider in making...

Heat pump wire size [ 3 Answers ]

I am installing a 5 ton heat pump. The wire run is 30 feet. The unit specifications are: Voltage 208-230, minimum circuit ampacity 33.0, max breaker 45.0. What size supply wire will I need to use? Thanks

What size is my heat pump? [ 1 Answers ]

How can you tell how may tons you have on a Rheem heat? I have a Rheem RPNL-042JAZ and was attempting to figure out if I had a 3 ton or a 3.5 ton unit.

View more questions Search