Ask Experts Questions for FREE Help !
Ask
    mholand12's Avatar
    mholand12 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 20, 2010, 08:01 AM
    Hunter fan model 23457
    My light works, my fan doesn't, checked the wires, all are still connected. This fan has worked great for several years. This unit has remote, when I try to turn the fan on I get a click no turning blades. Looked into the lower housing, saw a brief spark when trying to turn fan on again, then blades spun for a second then nothing. What needs replacing?
    eeseely's Avatar
    eeseely Posts: 100, Reputation: 3
    Junior Member
    		  
    #2

    Jun 20, 2010, 08:27 AM

    I think you have an poor connection in lower housing. It's possible the spinning blades cause the connection to open.

    Turn the power off to the fan when checking the wiring.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Jun 20, 2010, 09:05 AM

    Coming out of the canopy receiver is a white shared by both fan and light. Blue wire goes to the light and a black to the fan. Insure the black and the white are both securely held with a tight wire nut
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Jun 21, 2010, 11:02 PM

    What make is the fan?

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
    akanon's Avatar
    akanon Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Aug 29, 2012, 12:08 PM
    I need the bottom light kit for model 231481-380
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter fan and light switch model 27182 [ 6 Answers ]

Hello, here is my problem... I'm replacing an old single light/fan switch from with a new Hunter model 27182 combo switch. Here is what I have... from the ceiling my wiring is as follows and how it is connected to my new fan. White/white, black/black, red/blue, and two green and 1 bare wire wired...

Fan switch on hunter ceiling fan model #20537 not working. [ 1 Answers ]

The fan switch on my hunter ceiling fan model #20537 is not working. What colored wires are supposed to go into the switch, and at what position on the switch? I have 3 wires, green, brown and gray. The switch has 4 slots, 3 L 2 1

Hunter Fan Model 23282 - Wire Hunter Control Model 27182 [ 3 Answers ]

I have a new house that came pre wired for a light/fan. I connected my Hunter Fan (Model 23282) to the ceiling wiring as such FAN/Ceiling Wiring White/White Black/Black Black-White/Red Green/Green I believe I wired the celing correctly.

Hunter fan Model No. 25730. Lost my remote [ 2 Answers ]

Hi, I have a Hunter ceiling fan Model No. 25730 which is "remote controlled". I have lost the remote, or misplaced it for us Seniors. Question is, No. 1, can I replace the original remote? No. 2, can I wire the fan direct? There is a circuit board involved here also. I have pictures which may...

Hunter Ceiling Fan Model 23783 [ 2 Answers ]

Is there any problem piggy backing the electrical hook-up to the fan via the Hunter "Ceiling/Fan & Light Control (27183) to an exsisting wall outlet.

View more questions Search