Ask Experts Questions for FREE Help !
Ask
    ddclick's Avatar
    ddclick Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 16, 2010, 11:28 AM
    Can I install a toilet with 12
    Will a toilet with 12" bolt hole locations fit in a space where the bolt hole are located 11-3/8" from the wall
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Jun 16, 2010, 12:07 PM
    Hi DDclick...

    Yes, a 12" rough in toilet should fit perfectly with a 11 3/8" rough in. Here, toilets with a 12" rough usually have between 1-3" between the toilet tank and the finished wall after installation. At 11 3/8" it could be close or the toilet tank could still be up to 2.5" off the finished wall! You should be all set!

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can I install a toilet with 12 [ 3 Answers ]

My flange bolts are 11-3/8" from the wall. can I use a toilet with a 12" base

Replace Sealand toilet with traditional toilet. In home install [ 1 Answers ]

I purchased a home that has three Sealand toilets installed in the bathrooms. They look like toilets that should only be used on a boat. The previous owner was very "green minded" and I am sure he thought these to be real water savers. But, I hate them, they smell and they leak. I want to...

Toilet install [ 5 Answers ]

Do you measure the distance of the bolts on the bottom of a toilet to the wall to get the measurement for the center of the drain off the wall?

Looking for good Advise on replacing toilet flange on concrete slab to install toilet [ 26 Answers ]

To whom it may concern: I got a problem with a toilet that has been rocking and twisting for quite some time until it started leaking and what now I pull up the toilet to find out that the flange is broken on one side. I tried that flange plate from home depo but it won't work because the slab is...

New Install on Toilet [ 1 Answers ]

I am doing a total remodeling job on a pier and beam house, all new plumbing and electric. We are adding a new bathroom. Sub floor is 3/4" treated plywood and will have linoleum as the finish. How far is the toilet flange placed from the wall? And do I have to install a closet flange? Main...

View more questions Search