 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The wires are about 10 inches too short. In normal wiring one would make a junction box and wire up extensions, but there is no place for a junction box inside the unit, of course. The original fan motor also used a flexible metal conduit, although the new fan wires appear to be overinsulated for...
I have a Climatrol unit with an Emerson condenser motor that is shot. I bought an Emerson Rescue motor to replace it from the local AC supply store. The wiring diagram was stored in the AC unit, and it is no longer readable. The three disconnected motor wires from the old unit are yellow,...
Hello. I bought a house with central air, tried to start it up the other day, it ran, but the condenser fan would not shut off, only way to stop it was to pull the disconnect outside. I removed the cover and found the contactor, it looks to be in pretty good shape. Someone tie-wrapped something...
I had someone ask me today how to replace a 3-wire condenser fan motor with a 4-wire motor. He said there was not a 3-wire connection diagram on the motor. I told him to just use a new capacitor and wire it with all 4 wires. But my question is; Can any 4-wire motor be wired with the 3-wire...
I have found the pair of wires to hook up the condenser on to the wire terminals. Now I hook up one wire to the common and do I hook the other to the W connector or the Y connector on the controller terminals?
View more questions Search
|
