Ask Experts Questions for FREE Help !
Ask
    davidadrian140's Avatar
    davidadrian140 Posts: 124, Reputation: 2
    Junior Member
     
    #1

    Jun 7, 2010, 07:55 PM
    Why won't it work?
    Hello guys, it's me again.:) Ok, so I was connecting a dusk to dawn 70 watt light and when I turn the power on I can feel the breaker wanting to trip. The light stays dim and doesn't light up like it's suppose to. It's running on a 15 amp circuit. Could it be that it might have to run off a 20 amp circuit?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Jun 7, 2010, 08:31 PM

    No.

    What do you mean, you can feel the breaker wanting to trip?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #3

    Jun 8, 2010, 06:27 AM

    A 15 Amp circuit can light up 25 70watt bulbs, not your problem.
    I bet the Buss is burnt where the breaker plugs onto. An Electrician will remove and take a look. Measuring voltage first can verify it is fixed.
    Resetting breaker can't hurt.
    roryrobie's Avatar
    roryrobie Posts: 8, Reputation: -1
    New Member
     
    #4

    Jun 8, 2010, 09:33 AM
    Is your light rated 220 v or 110v?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Saturn won't start, power locks won't work, radio resets itself. [ 4 Answers ]

My 99 Saturn has had some starting problems in the past. It would sometimes not start but if you let it sit from anywhere from 45 minutes to 24 hours, it would eventually start. Or, after having Dad look at it, we could tap the starter and it would work. So we thought it was the starter. I...

Carrier Heater won't shut off! Blows only cool air. Heat won't work! [ 1 Answers ]

Does anyone know what I can do? My carrier heater is only 2 years old. As of yesterday the heater unit wouldn't shut off and when I turn the heat up it just keeps blowing cool air. I heard I can trip a breaker switch. Is that the electrical switch in the garage or on the heater itself? Please let...

My ballast won't work I think do to 120V supply when it's a 240V ballast will this work [ 6 Answers ]

I have a 240V 60Hz 600W ballast and Im trying to hook it up in a small nursury room in my home. I like in California so I think the V ac is 120. Can I use this converter on the top of this page. Will it work if I plug it in to the wall that supplies what I think 120V. I think this because on the...

Why won't it work [ 1 Answers ]

I have a acer laptop and when I try to press the question mark button this é comes up how can I make that go away so I can use the question mark:confused:

Kenmore he4 panel won't work and dryer won't start [ 1 Answers ]

I have had the circuit board/panel replaced once on my he4. I had only 2 weeks left on the warranty and figured it should be OK once it was fixed. They wanted another $200 to renew the warranty! Didn't have the $$ at the time. Anyway, the same darn thing is happening... you have to push the buttons...


View more questions Search