Ask Experts Questions for FREE Help !
Ask
    david1965's Avatar
    david1965 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 30, 2010, 05:45 PM
    How much to replace a clutch on a honda accord
    Smell of burning then depress pedal car won't go into gear honda accord w reg do I need a new clutch and any ball park figure of cost to supply and fit
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    May 30, 2010, 05:55 PM

    First, see if the slave cylinder moves the release fork, when someone else depresses the clutch. It may just be a problem of a failed slave cylinder or clutch master cylinder. Check things out carefully.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

88 honda accord clutch [ 1 Answers ]

My accord has a fairly new clutch, less than one year, but when starting, I can't get the clutch to fully engage, either to get out, or into gear. When in gear with the clutch in, the car will still lurch as if the clutch has been dropped. When in neutral, the clutch won't engage to get into gear!

1993 HOnda Accord Clutch pedal [ 1 Answers ]

When I depress the pedal on my accord (1993 5 speed manual w 204k miles) the pedal goes to the floor and sticks. I can start the car but cannot get it into gear. The pedal stays depressed and does not return to normal height. There is some fluid in the clutch fluid reservoir. What might be going...

Clutch repair on a 95 honda accord [ 1 Answers ]

Lost the pressure on clutch. Bled the line worked fine for 2 weeks. Went out again. Changed the slave cylinder. Still not clutch. Goes to floor won't engage. Changed the master cylinder. (old one showed signs of leaking) Tied to bleed the line. Still no pressure. Cutch stays to floor. Any...

94 Honda Accord Hydraulic Clutch Problem [ 1 Answers ]

I am losing clutch fluid from my LX Accord but cannot find any evidence on the floor or engine. Wwhere else should I look? Is it possible that the leak is so small that the DOT3 fluid evaporates before showing up on the garage floor? Thanks for any suggestions you might have. Vols


View more questions Search