Ask Experts Questions for FREE Help !
Ask
    kdlennis531's Avatar
    kdlennis531 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 24, 2010, 11:52 AM
    Help with connecting A/C wires to furnace
    Bought a foreclosure that was weatherized which included pulling the wires to the A/C? I've read every thing trying to get the new thermostat connected. I'm now very confused and extremely hot.

    It's a single speed a/c unit connecting to at Bryant model 355MAV Plus 90i™ Ultra Efficient Condensing Gas Furnace. Not sure of the age.

    The A/C is model 550AN0300-F

    The thermostat is a Carrier TP-PRH-A Performance Series Edge Thermidistat control.

    I've included pictures so you can see if all wires are connect correctly and where I need to connect the a/c wires which are white and orange.
    Attached Images
      

Check out some similar questions!

Connecting 6 ground wires together then to 3 switches [ 24 Answers ]

I am wiring a brand new switch box with 3-gang electrical box Which has 6 wires going into it. What is the best method for connecting the 6 ground wires together Then connect ground wire from these 6 wires to 3 switch's ground Screw. I have seen a few techniques, but they all seem to have...

Connecting 220V wires [ 26 Answers ]

The outlet that I have is with 3 wires, White, Black, and Red with no ground. This is connectec to a double pole at the main panel. I want to connect a receptacle to power an air conditioner unit 220V the receptacle has 3 crews Green which I know is ground. And two brass screw. The white wire is...

Connecting ceiling fan wires [ 4 Answers ]

I have two white and two black plus the ground wire coming from the ceiling. There is one white, one black, and one blue wire on the ceiling fan... I have tried everything but cannot get the light to work on the ceiling fan... How should these wires be connected so that the ceiling fan and light...

Connecting the right wires [ 4 Answers ]

I'm updating my thermostat and the one that I had is a ritetemp 8010 but the new digital thermostatRTH3100C wiring is not matching up This is the old setup! W-white Y-yellow G-green O-orange C-blue RC-red W2-brown There is also a jump wire that was with the red one and it is RH

Help: Connecting 3 wires [ 6 Answers ]

Pool Motor wires - white, black, black /w white stripe Power coming into pump house (single breaker) - white, black, bare copper. Which wires connect to what color?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.